PACIFIC CONVEYORS LTD.
Unit 101-7088,  Venture Street,  Delta, B.C. V4G 1H5                                             engineered material
Telephone  (604)-940-1868 : Facsimile (604)-940-8428                                                handling systems

SURPLUS AND USED EQUIPMENT FOR SALE

Registry last updated January 10. 2008

Posted
August 2006
Location
Toronto, Canada

A large amount of warehouse equipment has just become available and is set for sale to SERIOUS purchasers only.
This is part of a state of the art large-scale national distribution center located in the Greater Toronto Area. All of this equipment has been immaculately maintained and is in excellent condition.
Most of this equipment is still installed but ready for immediate removal, viewing of the equipment is by appointment only. If you are in the market now or in the near future for any of this equipment, this is an opportunity to secure some equipment in excellent condition at a fraction of the cost of new.
Racking Uprights
24” deep x 22’ 0” high                              approx. 60 pieces
24” deep x 23’ 0” high                              approx. 12 pieces
38” deep x 8’ 0” high                                approx. 36 pieces
44” deep x 10’ 0” high                              approx. 190 pieces
44” deep x 20’ 0” high                              approx. 25 pieces
44’ deep x 24’ 0” high                              approx. 530 pieces
48” deep x 12’ 6” high                              approx. 110 pieces
48” deep x 22’ 0” high                              approx. 750 pieces
54” deep x 23’ 0” high                              approx. 11 pieces
Racking load beams
8’ 8” x 2-1/2” deep(approx. 3000lb. Cap)            approx. 12000 pieces
9’ 4” x 3-4” deep(approx. 4000lb. Cap)               approx. 6300 pieces
Wire mesh decking
Assorted to suit above set ups                          approx. 5200 piece

Gravity roller conveyor
24” & 30” wide                                              approx. 3000 feet
Pallet rail conveyor
Single and Double row wheels                        approx. 1000 feet
Live roller conveyor
Flat belt, round belt, lineshaft models              approx. 5000 feet
Accumulation conveyor
Air & mechanical low and zero pressure          approx. 3000 feet
Belt conveyor
Both slider and roller beds available                approx. 2500 feet
Spiral up and down units                                approx. 2200 degrees
High sp eed shoe sorter
10 lanes with powered takeaways                   approx. 170 feet long
Induct, metering, and recirculation                   up to 200 CPM rate
Controls equipment
Full control consoles, Safety devices,
Photo cells, Scanning equipment
Miscellaneous equip ment
Floor supports, Ceiling supports
, Support structures, Curve sections, Guard rails,
Gate sections Mezzanine flooring, handrails, staircases
, Etc. Etc.
    

Posted
January 2005
Location
B.C. Canada
New
Electric motors. 1/3 HP..1-1/2HP,  480/3/60, 115/1/60, foot mount, C-Face, Explosion proof
VIBCO 3hp electric vibrator
Used
SEW Eurodrive gearmotors.  Several voltages, horsepower and ratios.

Posted
November, 2005
Location
Ontario, Canada






Used
Rapistan roller conveyor.  3-1/2" frame 21" BF, 1.9" dia rolls on 4" centers (330'0")
Rapistan roller conveyor.  2-1/2" frame 21" BF, 1.4" dia rolls on 4" centers (525'0")
Rapistan roller conveyor.  3-1/2" frame 9" BF, 1.9" dia rolls on 3" centers (1920'0")
Rapistan roller conveyor.  3-1/2" frame 15" BF, 1.9" dia rolls on 3" & 4" centers (1200'0")
Rapistan roller conveyor.  2-1/2" frame 15" BF, 1.4" dia rolls on 3" centers (250'0")
Buschman roller conveyor. 3" frame 21" BF, 1.4" dia. rolls on 3" centers (170'0")
Mathews roller conveyor. 2-1/2" frame 20" BF, 1.4" dia rolls on 3" centers (480'0")
Moody roller conveyor. 3-1/2" frame 21" BF, 1.9" dia. rolls on 3" & 4" centers (180'0")
Moody roller conveyor. 2-1/2" frame 21" BF, 1.4" dia. rolls on 3"  centers (780'0")
Hundreds of Supports available

Posted
October 2005
Location
B.C. Canada







Used
Two single carriage vertical conveyors.  36" long x 27" wide chain driven live roll carriages.
Net lift 14'0"
Several Portec A3214 flat belt curves. 90 degree and 45 degree
Roach RB196 belt conveyors 15" BF.
One Mathews WR3 palletiser complete with Allen Bradley PLC, pallet dispenser and
three strand drag chain discharge conveyor.
One Mathews WR4 palletiser complete with Allen Bradley PLC, pallet dispenser and
three strand drag chain discharge conveyor.
Several hundred feet K 3-1/2" and K  7" stainless flat top chain.

Posted
October, 2005
Location
Ontario, Canada

 

 

 









New
Three Rapistan 30" wide lineshaft powered gates, 48" and 60" length
170'0" Rapistan Blue Belt accumulator, 30" wide complete with several drives
Five Rapistan two stage meter belts complete with drives.  Length 12'0", width 30"
Used
Five Transnorm fiberglass spiral chutes. As illustrated.
Present induction and discharge elevations 14'0"...45"
Transnorm chutes are modular in construction, consisting
of a top section (90 degrees), a fall made up of a number of
ninety degree modules, and a bottom section (90 degrees).
Subject to some limitations, these chutes may be adapted
to your application by adding or removing fall modules, and
adjusting the length of the central column.

Converting surplus, or used equipment
 to a new application?

PACIFIC CONVEYORS offers  system design,
drawing, engineering and shop services, to
help streamline your installation,  and save
thousands in labour costs.
Components  available in our catalogue fit
 most manufacturers'  equipment,  with only
 minor field modifications

Pacific Conveyors  maintains this page as a service to vendors and users, and (hopefully) to increase
traffic through the rest
of our site.
The inclusion of equipment
on this page should not be
taken to imply that Pacific Conveyors guarantees or endorses - either the
equipment for sale, or the vendors  

Links to corporate partners

Catalogue

Home Page

Previous