STANDARD PRODUCT CATALOGUE
handling systems
page
|
|
PACIFIC
CONVEYORS LTD. STANDARD PRODUCT CATALOGUE |
engineered material handling systems |
return to main page |
|||||||||||||||||||||
|
|
||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
|
|
Technical Page 6 HORSEPOWER CALCULATIONS | |||||||||||||||||||||||
|
|
||||||||||||||||||||||||
|
|
FOR CHAIN DRIVEN LIVE ROLLER CONVEYORS | |||||||||||||||||||||||
|
|
|
Formula | ||||||||||||||||||||||
|
|
PRODUCT WEIGHT (1) (lbs) | Total weight of product on conveyor | ||||||||||||||||||||||
|
|
+ CHAIN WEIGHT (lbs) | weights and tables | ||||||||||||||||||||||
|
|
+ ROLL WEIGHT (lbs) | weights and tables | ||||||||||||||||||||||
|
|
+ DRIVE WEIGHT (lbs) | Best estimate (for small drives, use 250 lbs) | ||||||||||||||||||||||
|
|
= SUBTOTAL (1) (lbs) | |||||||||||||||||||||||
|
|
x FRICTION FACTOR (1) | Chain driven live roller 0.06 weights and tables | ||||||||||||||||||||||
|
|
Model 192CDLRR medium duty | = SUBTOTAL (1) (lbs) | BELT PULL DUE TO PRODUCT IN MOTION | |||||||||||||||||||||
|
|
Model 251CDLR heavy duty | PRODUCT WEIGHT (2) (lbs) | Portion of weight of product to be accumulated | |||||||||||||||||||||
|
|
Model 3530CDLR "Super" duty | x FRICTION FACTOR (2) | Equivalent to belt on steel slider tread (0.3) | |||||||||||||||||||||
|
|
Model 251CDLRA Accumulator | = SUBTOTAL (2) (lbs) | BELT PULL DUE TO ACCUMULATED PRODUCT | |||||||||||||||||||||
|
|
|
+ SUBTOTAL (1) (lbs) | Calculated in previous lines | |||||||||||||||||||||
|
|
= TOTAL BELT PULL (lbs) | TOTAL REQUIRED BELT PULL | ||||||||||||||||||||||
|
|
x BELT SPEED (fpm) | |||||||||||||||||||||||
|
|
= WORK RATE (ft lbs/min) | NOMINAL WORK RATE | ||||||||||||||||||||||
|
|
x 1.25 contingency | Contingency allowance for drive inefficiencies | ||||||||||||||||||||||
|
|
x 1.25 contingency | Contingency allowance for occasional overloads | ||||||||||||||||||||||
|
|
divide by 33,000 | (one horsepower = 33,000 ft lbs per minute | ||||||||||||||||||||||
|
|
= HORSE POWER | ENERGY REQUIREMENT 1HP = 0.75 kw | ||||||||||||||||||||||
|
|
Model 192CDLRC Curve | * treat deflected loads, or product in contact with guides as accumulated | ||||||||||||||||||||||
|
|
Model 251CDLRC Curve | * Zero pressure accumulators require no calculation for accumulated loads | ||||||||||||||||||||||
|
|
|
* Assume that only half the product on an accumulator is in motion. | ||||||||||||||||||||||
|
|
* Treat all slave driven curves and spurs as one 10'0" section | |||||||||||||||||||||||
|
|
Home Page | Previous Page | Next Page | |||||||||||||||||||||
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|